Common Problems and Solutions of Qingdao Advertising Gate

Common Problems and Solutions of Qingdao Advertising Gate

1. The rod flutters seriously in the process of rising or falling.
Reasons: The spring dispatch of Qingdao Gate is too tight or too loose
Processing method: Spring tightness dispatched by dispatching bolts
2. Continuous active lifting and falling of poles
Reason: The sense of the earth is too sensitive.
Processing methods: 1. Put the sensitivity of the ground sense to a low level.
(2) The orientation of the ground inductance coil and the interval between the rods are relatively close.
(3) Whether the two ground sensing leads are twisted tightly or not. .
3. Press the motherboard button to rise and fall, press the remote control to not respond.
Reason: The remote controller and gate code do not match
Processing method: Learn the code of remote controller and gate.
4. The rod will not respond to the push of the motherboard button or remote control in horizontal condition.
Reasons: The motor may be blocked due to inertia, which may cause the motor to overrun the limit.
Processing method: First power off the gate, then adjust the position of the brake rod with the hand wheel under the roller core, and then power on.
6. When the starting rod reaches half, neither the starting rod nor the falling rod can be achieved.
Reason 1: Spring tension is too small, the motor can not pull the rod to rise.
Processing method: Rise the main rod to the vertical position with a rocker handle, and hurry up the nut on the spring.
Reason 2: The internal gear wear of the reducer (this phenomenon is reflected by the fact that the motor is still rolling and the main rod can't rise/fall)
Processing method: Replace reducer.
Qingdao Road gate, license plate recognition Intelligent Equipment Co., Ltd. is a high-tech company engaged in research and development, production and sales of advertising Road gate, Qingdao High-definition License Plate Recognition System, Qingdao Channel Change Gate and High-speed Road Gate. Welcome new and old customers to our company for investigation and guidance.